Digital Security System

Introduction This years electronics systems cipher was a computer security system. It was a complex project, because we first had to research the different ways for the project to be done. Internet was the main way of research for this, and for the virtu in each(prenominal)y discover it didnt braid up anything as far as what we could use. So, in turn we sat down and started to think, what would happen if we apply a digital security code. So thats what we did, we put unitedly a complicated system incorporating a dual blank-input NAND gate, a quad dual-input OR gate, and an inverter. When the correct combination is entered it triggers a SCR that in turn triggers a relay race, making the causation turn on in the computer. If the wrong combination is entered it triggers another SCR that triggers a relay controlled shock circuit giving power to a piezo gong emitting an alarm sound. Technical          The circuit supplies its own power so it doesnt inter cede with the power bestows wattage ratings. The power is a power supply circuit that incorporates the 7805 regulator chip. In the circuit all of the chips essential have a constant 5 volt supply.

alone of the switches on the circuit are DPST, with one of the throws on the nix 5 volts, another throw having a validatory 5 volts, and the pole having to be filmed to either +5 or ?5 volts. When the pole is selected to the ?5 volts it sends a point of 0, but if you select +5 volts it sends a sharpen of 1. When all of the inputs to the NAND gate are 1s it will emit a signal of 0 when that signal hits the inv erter it turns it to a signal of one. When ! this signal is a one it... If you loss to get a full essay, beau monde it on our website: BestEssayCheap.com

If you want to get a full essay, visit our page: cheap essay